Three foolproof ways to clean and shine your shower screen door

Even cleanfluencers get dirty shower screens, thanks to soap scum, hard water, and the fact it’s where we go to wash our own dirt off.

There’s no requirement to have a spotless shower screen, but if yours is looking duller it’s an easy problem to fix.

Some elbow grease is usually required, but you don’t need expensive cleaners to remove water marks and limescale deposits. In fact, you can do it with items you probably already have.

These three tried-and-tested methods serve different purposes depending on your needs. What they have in common, though, is their effectiveness.

Check them out below:

The classic method

This is the best way to clean your shower screen if you’re not dealing with stubborn marks or stains.

Those who live in soft water areas shouldn’t need to scrub much, but water marks will require soaking and/or multiple goes.

What you’ll need:

  • White vinegar
  • A spray bottle
  • A microfibre cloth
  • Newspaper (optional)
  • Washing up liquid (optional)

What to do:

  • Fill the spray bottle with half vinegar and half water
  • You can also add a very small teaspoon of washing up liquid to the mixture to boost its grease-cutting abilities
  • Spray this all over the glass, before leaving to soak for around 10 minutes
  • Use a microfibre cloth to scrub away marks and remove residue
  • If you have newspaper, scrunch some up and rub on the glass in a circular motion – the paper absorbs moisture and leave a streak-free shine

If limescale isn’t budging, go over it again (but be more liberal with the vinegar solution and leave it to soak for longer if necessary).

The quick method

We get it, cleaning can be boring. And when you add work, social commitments, and families into the mix it’s even harder to find time for chores.

This method won’t focus on the nooks and crannies, but can be incorporated into your shower or bath time to clean your house while you clean yourself. Or, you can use it simply make the job easier with touch-ups before a more thorough clean.

What you’ll need

  • A Dishmatic washing-up handle with soft sponge attachment (unbranded options are also available)
  • Washing up liquid
  • Vinegar (optional)

What to do:

  • Ensure you have the softer sponge attachment first, as the green scouring pad ones can scratch glass if used too vigorously
  • Fill the Dishmatic with washing up liquid, adding a few drops of vinegar for shine if desired
  • Whenever your shower screen needs it, scrub away, using the water from the shower to rinse any leftover product
  • Once rinsed, you can buff with a microfibre cloth or newspaper if you wish

The stubborn stain removing method

You’ve soaked, you’ve scrubbed, and still water marks and soap scum remain?

In these cases, we need to bring out the big guns – aka magic sponges. These are sometimes also labelled as magic erasers or melamine sponges, and can be bought from discount shops, hardware stores, and supermarkets.

They use melamine as a fine abrasive to slough off hardened matter, which makes for powerful cleaning but does mean you should exercise caution to avoid scratches.

Wet the sponge and lightly rub over the glass in circular motions. Don’t be tempted to use too much force – a gentle touch is what’s needed with these.

Once you’ve dislodged the water marks you can rinse and clean as normal.

How to keep your shower screen clean

Mastering glass cleaning is good, but saving yourself future jobs is even better. Try these tips to prevent water marks and staining.

  • Use a squeegee to remove droplets after showering
  • Switch to shower gel from soap, or opt for a bar soap without talc
  • Daily shower cleaning sprays can be used to stop build-up
  • Try a very small amount of baby oil on a cloth, wiped over clean glass then thoroughly rinsed, to prevent further marks sticking
  • If your problem is caused by hard water, a water softening shower head could help

Do you have a story to share?

Get in touch by emailing [email protected]

Source: Read Full Article